Marble Resin
Water-white liquid unsaturated polyester resin for documented cultured-marble and artificial-stone contexts.
Samrat Poly Resins supplies Marble Resin as a water-white liquid unsaturated polyester resin for the TDS-listed cultured-marble and artificial-stone contexts. It is the supplied resin component, not a finished slab, countertop, wash basin or other completed marble product; begin with the actual finished product and the current TDS before selecting a grade.
Price
Price on Request
Marble Resin pricing varies based on:
- Order Quantity
- Finished marble or stone product, document reference and appearance requirement
- Quantity, packaging need, document requirement and delivery location
Product details
| Documented Product Role | Liquid resin for cultured-marble and artificial-stone contexts |
|---|---|
| Physical Form | Liquid (TDS) |
| Colour / Appearance | Water White (TDS) |
| Packaging | 200 kg pack |
| Minimum Order Quantity | 200 kg |
| Shelf Life | 3 months |
| Storage | 20–30 °C; cool, dry place away from direct sunlight |
Technical specifications
| Resin Family | Unsaturated polyester resin |
|---|---|
| Viscosity | 450 cPs at 25 °C |
| Gel Time | 15–20 minutes at 25 °C |
| Curing Time | 20–40 minutes at 25 °C (TDS) |
| Specific Gravity / Density | 1.12 g/cm³ |
| Styrene Content | 35% (TDS) |
| Flash Point | 32 °C, closed cup (TDS) |
Samrat Marble Resin is a water-white liquid unsaturated polyester resin. Its current Technical Data Sheet positions the supplied resin for cultured marble and artificial stone, including the listed slab, vanity-top, countertop, wash-basin, wall-panel and architectural-product contexts. Samrat supplies the liquid resin, not finished marble slabs, countertops, wash basins or other completed stone products. Review the current product document with the actual finished product before selecting a grade.
Use the dedicated Marble Resin TDS for its supplied-resin data. For a quartz or engineered-stone requirement, review GP Quartz Resin; both documents use some artificial-stone terminology, so the exact finished product and current TDS should guide selection. For broad general FRP, door/plywood lamination or a specified two-part epoxy system, review GP Clear Resin, Lamination Resin or Clear Casting Resin respectively.
What is Samrat Marble Resin?
The dedicated Marble Resin TDS identifies this product as a water-white, liquid unsaturated polyester resin for cultured marble and artificial stone. It is a raw resin component supplied to manufacturers, not a finished marble sheet, slab, countertop, vanity top, wash basin, wall panel or architectural item.
Use the Marble Resin documents as a grade check
The TDS is the product-data reference for Marble Resin: supplied form, typical technical data and supply details.
Supplied liquid resin
The TDS lists a water-white liquid form, 200 kg packaging, 200 kg MOQ, three-month shelf life and 20-30 °C storage guidance.
TDS technical data
The TDS lists 450 cPs viscosity at 25 °C, 15-20 minute gel time at 25 °C, 20-40 minute curing time and 1.12 g/cm³ specific gravity as typical product data.
Your formulation
Mineral type, filler loading, pigment level and resin-to-filler ratio belong to your own formulation. Share them with your enquiry.
Supplied resin data is not finished marble performance
What the TDS describes
The TDS uses terms including smooth flow, high-gloss finish, low shrinkage and water or chemical resistance after full cure. These are the document's product-positioning statements, not a guaranteed result for every finished composite.
What remains system-dependent
Finished appearance, gloss, shrinkage, hardness, polishability, chemical performance and dimensional result can depend on the complete formulation, construction, cure state, surface system and tested configuration.
Choose the product by the documented finished-product role
These concise routes help a buyer compare the actual product requirement without treating all liquid polyester or casting resins as interchangeable.
Marble Resin
Start here for the current TDS-listed cultured-marble and artificial-stone contexts, then confirm the exact finished product and document requirement.
Marble Resin vs GP Quartz Resin
GP Quartz Resin has its own documented artificial-quartz, engineered-stone and composite-mineral role. Both source sets use some artificial-stone language, so compare the documents and confirm the exact product rather than assuming an exclusive boundary.
Marble Resin vs GP Resin
GP Clear Resin is the broad general-FRP route and is not a substitute for a documented marble or stone-composite requirement. Where the finished product is a cast stone component rather than a laminate, start from the Marble Resin document.
Lamination Resin or Epoxy Casting
Review Lamination Resin for its door, plywood and FRP-bonding role, or the separate Epoxy Clear Casting Resin system where that material family is specified. Neither comparison establishes a universal performance ranking.
Before ordering Marble Resin
Share the finished marble or stone product, required supplied appearance or finish, applicable technical requirement, quantity, packaging need, delivery location and documentation required. If the enquiry is for quartz, engineered stone, onyx, a finished slab or another mineral composite, name that requirement explicitly so the correct product route can be reviewed.
Key features
- TDS-identified water-white liquid unsaturated polyester resin
- TDS-listed cultured-marble and artificial-stone product contexts
- Published typical TDS data for viscosity, gel time, curing time, density, storage and shelf life
- TDS describes fully cured water and chemical resistance at a general level; it does not publish a chemical-compatibility chart or application approval
- 200 kg packaging and 200 kg minimum order quantity published in the current TDS
Applications
- Cultured marble slabs and vanity tops
- Kitchen and bathroom countertops, wash basins
- Wall panels, window sills and decorative architectural components
- Marble sheets, statues, railings and balusters
