Epoxy & Casting
Clear Casting Resin
Crystal-clear, bubble-resistant resin for casting and art.
- Viscosity
- 900 cPs (at 25°C)
- Gel Time
- 40 minutes (at 25°C)
Product family
Epoxy Resin — Casting, Art & Laminating Systems
Samrat Poly Resins supplies 5 epoxy products: clear casting resin, self-levelling art resin, a fibreglass laminating epoxy, a bisphenol-A epoxy for industrial work, and the polyamide hardener that cures them. Each is a distinct published grade with its own technical data sheet, and this page is the starting point for choosing between them.
5Published
Products
Products
5 products
Epoxy Resin products
Epoxy & Casting
Epoxy Art Resin
Self-levelling, crystal-clear epoxy for artistic finishes.
- Viscosity
- 900–1200 cPs (mixed, at 25 °C)
- Cure Time
- 24 hours
Epoxy & Casting
Epoxy Hardener
Polyamide curing agent for compatible epoxy resin systems.
- Viscosity
- 500 cPs (at 25 °C)
- Gel Time
- 30–60 minutes (at 25 °C)
Epoxy & Casting
Fiberglass Epoxy Resin
General-purpose epoxy resin system for fibreglass fabric reinforcement and lamination.
- Viscosity
- 700 cPs at 25°C
- Gel Time
- 35-45 minutes at 25°C
Epoxy & Casting
Bisphenol Resin
Bisphenol A and epichlorohydrin-based thermosetting resin for laminating, casting, coating and encapsulation.
- Viscosity
- 600 cPs (at 25°C)
Epoxy resin grades compared
Typical values from each grade's published data sheet, for shortlisting. They are not guaranteed properties of a finished part.
| Grade | Viscosity | Gel time | Data sheet |
|---|---|---|---|
| Clear Casting Resin | 900 cPs (at 25°C) | 40 minutes (at 25°C) | TDS |
| Epoxy Art Resin | 900–1200 cPs (mixed, at 25 °C) | See data sheet | TDS |
| Epoxy Hardener | 500 cPs (at 25 °C) | 30–60 minutes (at 25 °C) | TDS |
| Fiberglass Epoxy Resin | 700 cPs at 25°C | 35-45 minutes at 25°C | TDS |
| Bisphenol Resin | 600 cPs (at 25°C) | See data sheet | TDS |
Before you order
Epoxy and epoxy vinyl ester are cured by different chemistry
Two products on this site carry Bisphenol-A in their description and are routinely confused. They are not interchangeable, and neither is their hardener.
Epoxy
Clear Casting Resin, Epoxy Art Resin, Fiberglass Epoxy Resin and Bisphenol Resin
Cured by an amine hardener mixed at a fixed ratio. Samrat's Epoxy Hardener is a polyamide curing agent published at 2:1 by weight. The ratio is stoichiometric, so guessing it leaves a permanently soft cure.
See the published hardener dataEpoxy vinyl ester
Vinyl Ester Resin
Built on a Bisphenol-A epoxy backbone but finished as a vinyl ester, so it cures like a polyester: MEKP catalyst, published at 1.5% for its stated gel time. An amine epoxy hardener will not cure it.
See Vinyl Ester ResinEpoxy Hardener's data sheet states compatibility with epoxy resin systems and gives its type and ratio, but it does not name a specific Samrat resin as a qualified partner. Confirm the exact resin and hardener pairing with us before ordering rather than assuming one hardener suits every grade on this page.
Enquiry
Ask about an Epoxy Resin product
Share the product (if known), intended application, expected quantity and delivery location so we can point you to the right product or prepare a quote.