Bisphenol Resin
Bisphenol A and epichlorohydrin-based thermosetting resin for laminating, casting, coating and encapsulation.
Samrat Poly Resins supplies Bisphenol Resin for laminating, casting, coating and encapsulation contexts. The current product-specific TDS identifies a Bisphenol A & epichlorohydrin-based thermosetting resin system and is the technical authority for this grade.
Price
Price on Request
Bisphenol Resin pricing varies based on:
- Order Quantity
- Intended application and technical requirement
- Quantity, packaging, required documentation and delivery location
Product details
| Grade | Premium grade (current TDS) |
|---|---|
| Packaging | 20 kg pack |
| Minimum order quantity | 100 kg |
| Shelf life | 12 months (unopened) |
| Storage | 20-30°C; cool, dry place away from direct sunlight |
Technical specifications
| Resin type | Bisphenol A & epichlorohydrin based (thermosetting) - current TDS wording |
|---|---|
| Curing methods | Room-temperature cure with an amine hardener (TDS) |
| Processing methods | Laminating, casting, coating, encapsulation (TDS) |
| Viscosity | 600 cPs (at 25°C) |
| Gel time | 35-45 minutes (at 25°C; TDS typical data) |
| Styrene content | Not applicable |
| Specific gravity / density | 1.10 g/cm³ (at 25°C) |
| Thermal data | 80°C (fully cured) |
| Flash point | >100°C |
Bisphenol Resin is a premium-grade Bisphenol A & epichlorohydrin-based thermosetting resin manufactured by Samrat Poly Resins at Doraha, Punjab. Its TDS describes a low-viscosity liquid for laminating, casting, coating and encapsulation, and lists FRP composites, flooring and protective coatings, electrical encapsulation, tooling, structural bonding, and casting or coating as its application contexts. This is a separate specialist thermosetting product route from Samrat's general-purpose UPR and Vinyl Ester Resin grades.
The current product-specific TDS is the technical authority for this Bisphenol Resin grade. The TDS identifies a room-temperature cure with an amine hardener, but this page does not provide ratios or process instructions. Glass Fiber is a separate reinforcement decision for an FRP composite. For a broad general-purpose polyester requirement, review Unsaturated Polyester Resin or GP Clear Resin. Vinyl Ester Resin is a separate product route with its own TDS.
What is Samrat Bisphenol Resin?
The current product-specific TDS identifies a premium-grade Bisphenol A & epichlorohydrin-based thermosetting resin system. It describes a low-viscosity liquid and lists laminating, casting, coating and encapsulation as product contexts. This is the exact TDS terminology used on this page; the document does not identify the product as a general-purpose UPR or as Vinyl Ester Resin.
Use the product-specific TDS for this grade’s chemistry, technical data and supply details. Bisphenol Resin is manufactured by Samrat Poly Resins at Doraha, Punjab, and is a separate product from Fiberglass Epoxy Resin.
Use the current product-specific data
Product-specific TDS
The current TDS publishes this grade’s resin wording, supplied-resin data, packaging, MOQ, shelf life, storage, listed curing system and application contexts.
Separate from Fiberglass Epoxy Resin
Bisphenol Resin (600 cPs, 1.10 g/cm³) and Fiberglass Epoxy Resin (700 cPs, 1.15 g/cm³) are separate products with their own TDS. Choose by the finished application.
Application-led selection
Match the current TDS to the finished application and stated requirement. Bisphenol Resin, UPR, Vinyl Ester Resin and conventional epoxy products remain separate selection routes.
Supplied resin data is not finished component approval
Published supplied-resin data
Use the current TDS for the published resin type, viscosity, gel-time value, density, thermal data, storage, packaging and shelf-life information. The TDS calls these values typical; they are not a guaranteed outcome for every end use.
Finished system remains separate
A finished laminate, coating, casting, electrical assembly or bonded component can depend on the complete system, construction, cure state, substrate or reinforcement and tested configuration. The supplied resin alone does not establish final performance or an application approval.
Separate reinforcement role
For the TDS-listed FRP composite context, Glass Fiber is the separate reinforcement product. This page does not prescribe a mat grade, resin-to-glass ratio, laminate schedule or fabrication method.
Choose the resin route by the documented requirement
These concise selection routes prevent a Bisphenol Resin enquiry from being confused with a broad polyester, a specialist Vinyl Ester, a fire-retardant requirement or a separately documented epoxy product.
Bisphenol Resin
Review this route for the current TDS-listed laminating, casting, coating and encapsulation contexts, using the product-specific TDS before order placement.
UPR or GP Resin
Unsaturated Polyester Resin is the broad category and GP Clear Resin is Samrat’s general-purpose FRP route. The current Bisphenol TDS does not identify this product as UPR.
Separate Vinyl Ester Resin
Vinyl Ester Resin has a separate TDS and specialist industrial FRP route. Use each product’s current TDS and intended application rather than treating the products as interchangeable.
Isophthalic or fire requirement
Samrat’s published isophthalic product route is ISO Fire Retardant Resin. If isophthalic chemistry or a fire requirement is specified, share it and review the separate product data; this Bisphenol page establishes neither.
Separate epoxy-system route
Epoxy Clear Casting Resin is a separate published product route. Although the Bisphenol TDS lists an amine-hardener cure system, it does not establish interchangeability with that product or its decorative-casting role.
Fire-performance requirement
Bisphenol Resin is not presented here as fire retardant. If a project specifies a fire class, rating or test method, share it and review the relevant fire-retardant product route before selection.
Before ordering Bisphenol Resin
Review the current product-specific TDS, then share the intended finished application, any stated chemistry or technical requirement, expected quantity, packaging need, delivery location and required documentation. For a service environment, include the medium, concentration and temperature where relevant; this supports a product discussion without implying a chemical-compatibility recommendation, formulation or finished-system approval.
Key features
- Current TDS identifies a Bisphenol A & epichlorohydrin-based thermosetting resin system
- Published typical viscosity, gel-time, density and thermal data
- TDS-listed laminating, casting, coating and encapsulation contexts
- Published 20 kg packaging, 100 kg MOQ, storage and shelf-life information
- Current product-specific TDS available as the technical selection reference
Applications
- Laminating and FRP composites
- Industrial flooring and protective coatings
- Electrical encapsulation, tooling and structural bonding
- High-end casting and coating applications
