What this industry manufactures
This lamination step produces veneer-faced solid-wood and wood-core doors — timber doors finished with a bonded decorative wood veneer for a premium appearance, used across residential and office interiors where a natural wood-grain finish is wanted.
Why Lamination Resin (LR Resin) is suitable
Lamination Resin (LR Resin) bonds reliably to timber and wood-core substrates as well as to the veneer sheet itself, and its 5-minute gel time keeps veneer-facing production moving efficiently. Its clear, transparent cure also avoids discolouring a natural wood-grain veneer the way a less refined resin might. For structural timber-door frame reinforcement rather than decorative veneer bonding, GP Clear Resin is the more suitable choice.
Required resin characteristics
- 01Reliable adhesion to timber and wood-core substrates as well as to the veneer sheet
- 02Fast gel time to keep veneer-facing production moving
- 03A clear cure that doesn't discolour a natural wood-grain veneer
- 04Room-temperature or press-assisted cure depending on production scale
- 05Consistent bond quality across every door in a batch
Manufacturing process
Resin catalysed with an MEKP hardener and cobalt octoate accelerator is applied to the timber or wood-core door surface, the decorative veneer sheet is positioned on top, and the assembly is pressed or clamped until the resin cures and bonds the veneer permanently to the wood beneath it. The finished surface is then sanded and polished as needed.
Advantages
- Reliable adhesion to both timber substrates and veneer sheets
- 5-minute gel time supports efficient veneer-facing production
- Clear cure preserves the natural appearance of the wood-grain veneer
Common products produced
- Veneer-faced solid-wood doors
- Wood-core doors with a bonded decorative veneer finish
Frequently asked questions
Yes, it bonds reliably to both natural wood veneer and synthetic decorative laminate sheets.
No — it cures clear and transparent, which is why it's suited to work where the natural grain and colour of the veneer need to stay visible.
With an MEKP catalyst (around 1.5%) and a cobalt octoate accelerator (around 0.4%), the same system used across Samrat Poly Resins' general-purpose grades.
The bonding principle is similar, but this page focuses specifically on timber and wood-core doors finished with a natural wood veneer rather than a synthetic laminate sheet.
Yes — its gel time suits either a hot-press production line or clamped room-temperature bonding for smaller-scale work.
Need resin for your wood veneer door lamination?
Get a bulk quote or talk to our technical team about the right dosage for your veneer-facing line.