The published epoxy system is not fully specified as a commercial kit
The current Fiberglass Epoxy Resin TDS identifies an amine hardener as part of the curing system. It does not name a specific hardener product, state that the hardener is included in the pack, or declare a pre-approved resin-and-hardener commercial kit.
That boundary matters for procurement. A buyer should identify whether the requirement is for resin only or for a confirmed complete system rather than assuming an accessory or separately listed product is already included.
Epoxy Hardener is a separate product route
Samrat publishes Epoxy Hardener as a separate polyamide, amine-based curing-agent product. This establishes a separate product role: it does not prove that it is the exact compatible hardener for every Samrat epoxy route.
Compatibility should be confirmed for that actual requirement.
Do not turn system identity into operating instructions
A resin-and-hardener system description is useful for identifying the material route. It is not a public instruction to mix components, adjust working time, change cure speed, select a hardener amount or design a laminate.
This guide intentionally excludes ratios, mixing order, pot-life adjustment, cure schedules, post-cure conditions and troubleshooting. Those details should not be transferred between product families or inferred from a broad epoxy label.
Reinforcement remains a separate decision
The current Fiberglass Epoxy TDS names fabric reinforcement. Glass Fiber is a separate reinforcement route, and its CSM 300 or CSM 450 listings do not establish a recommendation for this specific epoxy product.
The finished composite requirement should identify the reinforcement form if known, but this page does not prescribe fabric type, mat weight, laminate thickness, resin-to-glass ratio or ply sequence.
What to confirm before procurement
State the finished fiberglass or composite component, whether resin only or a complete system is required, the exact current resin document, reinforcement form if known, any listed process context relevant to the requirement, quantity, packaging, delivery location and documentation need.
This creates a focused technical and commercial enquiry without asking a buyer to disclose or receive a manufacturing recipe.